VoIP App for Android

Where and how do I get the app onto my Android phone?

  1. Use your Android phone to scan the QR code below for quick installation:
  2. Or, find the DynaSky VoIP app using the keyword "DynaSky," select the app. The item details screen appears.
    • Select either the FREE or Install button.
    • Press OK to accept permissions for the app. The DynaSky VoIP will start downloading immediately.
  3. You can also visit Google Play on your computer, search for keyword "DynaSky," then download the DynaSky VoIP app on your computer and install the application on your Android phone.

How do I set up my app?

  1. Make sure your app is properly installed and your eCard account is active and has sufficient balance to make calls.
  2. Launch your DynaSky VoIP app.
  3. Set up your DynaSky VoIP by pressing Menu and click on "Settings"
  4. Tap "DynaSky Login". Enter your DynaSky web login username and password and then tap "Log In".
  5. Go back to your dial pad. The app will try to register your account. If registration fails, please double check your settings.
  6. Once the registration succeeds, to make your first call, simply dial the destination number from the app's dial pad, as if you were dialing from the U.S., and the call will go through.
    • For U.S. & Canada calls, dial 1 + Area Code + Telephone Number.
    • For international calls (outside the U.S. & Canada) dial 011 + country code + area code + telephone number. If EZ Phonebook is already set up on your account online, then simply dial the EZ Phonebook number.

How do I use DynaSky VoIP to call existing contacts in my Android phone?

The DynaSky VoIP integrates your existing phonebook into its interface so you may have ease of navigation and use. To use the app in calling your existing contacts, follow these simple steps:

  1. Please make sure that the phone numbers registered in your existing phone book are in the following format:
    • For U.S. & Canada contacts, the phone number should be entered and saved as 1 + Area Code + Telephone Number
    • For international contacts (outside the U.S. & Canada), the phone number should be saved as 011 (or “+”if the “Substitute + by 011” setting is on) + country code + area code + telephone number.
  2. From the DynaSky VoIP's integrated Contacts, locate the contact you wish to call. Search the contact as you would using your Android phone contacts.
  3. Press "CALL" after choosing the contact for the app to start dialing the number.
  4. To end a call, simply tap "End Call".

How do I exit the app?

You can exit DynaSky VoIP by pressing Menu and clicking on "Exit". Once exit the app, VoIP users will not be able to receive calls at the app; incoming calls will then be going to your VoIP voicemail box.

How do I remove the app?

To remove the DynaSky VoIP from your Android phone, follow these steps:

  1. On your Android device, press Menu and then select My Apps, on others, go to Settings and select Applications.
  2. Select DynaSky VoIP.
  3. On the application home screen, select the "Uninstall" button.

Note: due to the wide range of Android devices available, the instructions above may not reflect the exact setup of your phone.

Can I make calls from different devices?

You may switch between devices to make calls, once the device is registered.

*To refresh your Android app registration session, please exit DynaSky VoIP by pressing Menu and clicking on "Exit", then open the app again.

Can I receive calls on multiple devices at the same time?

No, incoming calls will only ring to the last registered device, or to your voicemail if active registration is not found on any device.

If you are switching between devices, please be reminded to exit the previously registered device, and then register the device where you’d like to receive calls, if it is not the last registrant with DynaSky network.

*To refresh your Android app registration session, please exit DynaSky VoIP by pressing Menu and clicking on "Exit", then open the app again.

Why am I not receiving my VoIP incoming calls on the app?

  1. Please check if your user name and password are entered correctly, and if your app has an active registration session with DynaSky. Your username and passwords can be found in your eCard account, Account Summary, under "My Product Access Info".
  2. Please check if your app is properly registered with DynaSky Network. You could test by calling your voicemail by dialing *0 from the keypad. If you could hear DynaSky voice prompt, that means your app’s registration session is active.
  3. Please check if your eCard account is active and has sufficient balance to make calls.
  4. Please check if you have other devices such as ATA, IP Phone, or computer softphone registered with the same account, and is in use. This could override your app’s registration session.

The app works with Wi-Fi but not on 3G ! Why is that?

First, please check with your mobile carrier that VoIP is allowed on their 3G network. Some carriers forbid VoIP in its contracts. Or, you may be experiencing spotty 3G signal, which affects a steady flow of traffic, and thus the voice quality deteriorates.